18 replies to this topic

[bkkcitiboi]

Hey

WOW!! This is absolutely amazing!!

The WiFi problem is solved!! Now, my touchpad connects automatically to my WEP protected WiFi LAN!!

Great work, guys!! Keep it up.

bkkcitiboi

[mdxpython]

Glad to hear! I just put the 5/22 nightly on my touchpad yesterday and had no problems at all.

Edited by mdxpython, 29 May 2012 - 03:42 AM.

[ksgoh]

Hi, mind share which nightly build are u using? i still need to manually "forget" the network and reconnect few times... (this problem happens only after i upgrade to the may build, never had this problem in the april build)..

[cearbhaill]

I started with 5/22 and have never had the first issue with wifi.

[Urbaneggman]

I started with the 5-7 nightly and have had no wifi issues.  Using WPA2 on 54g

[bkkcitiboi]

ksgoh, on 31 May 2012 - 03:31 AM, said:

Hi, mind share which nightly build are u using? i still need to manually "forget" the network and reconnect few times... (this problem happens only after i upgrade to the may build, never had this problem in the april build)..

Sorry for my late reply.

For me, the WiFi problem got sorted out with effect from update-cm-9-20120529-NIGHTLY-tenderloin-signed.zip.  Just download the very latest (now it is update 20120601) as each nightly build is an update from the previous one.

Good luck!

[martimusprime]

I have the 5/30 nightly on my touchpad and am having trouble getting a wifi connection set up. I have a WEP setup, and after I put in the password it still shows full signal for a second, then the signal drops out as obtains an IP address. If I let it go long enough it will come back saying it didn't connect to keep from connecting to  too slow of a connection. I'm in range and the network speed is not the issue. any help?

[PSeastrand]

I have the same problem and the only solution I've found is to restart the router.  Once it comes back online, the TouchPad connects immediately.  I'm using the MonoPrice Wireless "N" Router.

[martimusprime]

I am running nightly 6/3 now and still having the same trouble. Tried restarting router but to no avail. I tried clearing the cache in between installing the nightlies and nothing new. I find it wierd that the wifi signal is full when you go to settings/wifi and when I put in the wep passcode it saves and when it says "obtaining ip address" the signal drops out and after a few minutes says it avoided a poor internet connection. Any help?

[martimusprime]

OK, so I was able to connect to another network that had no security protocol. Maybe channel? I heard people have theirs hooked up through WEP without an issue. Also, where can I go to download the android market (play) that will work with this?

[alan sh]

• I'm using WEP and WPA2 with the 6/1 nightly build and it connects autmatically to both as I get near them. WPA is channel 11, WEP is channel 6.

Alan

[paulvi]

martimusprime, on 04 June 2012 - 04:28 AM, said:

I have the 5/30 nightly on my touchpad and am having trouble getting a wifi connection set up. I have a WEP setup, and after I put in the password it still shows full signal for a second, then the signal drops out as obtains an IP address. If I let it go long enough it will come back saying it didn't connect to keep from connecting to  too slow of a connection. I'm in range and the network speed is not the issue. any help?

I HAVE THE SAME PROBLEM

alan sh, on 07 June 2012 - 04:36 PM, said:

• I'm using WEP and WPA2 with the 6/1 nightly build and it connects autmatically to both as I get near them. WPA is channel 11, WEP is channel 6.

Alan

HOW DO I DO THIS I HAVE THE SAME PROBLEM FULL SIGNAL BUT UNABLE TO CONNECT I DO HAVE WEP ON THE ATT
HOW DO I DO THIS

[brandon317]

Im so frustrated with the wifi not connecting what can i do, tryed channel 11 and it will say connecting to network and never goes anywhere from there. forgetting the network worked for the first month and reconnecting, but now i cant connect at all. someone please help me

[ptekelly]

Some people found clearing davilk cache works,

Sent from my cm_tenderloin using Tapatalk 2

[Nevertells]

brandon317, on 30 June 2012 - 03:08 AM, said:

Im so frustrated with the wifi not connecting what can i do, tryed channel 11 and it will say connecting to network and never goes anywhere from there. forgetting the network worked for the first month and reconnecting, but now i cant connect at all. someone please help me

Try channel 1 or 6.

[mackjay]

Hello
I am  having the problem again of "connected but no internet". Using CM9 , nightly: 16 July. TP connects right away to the wifi, but the icon remains gray, never turns blue and no internet apps will work.  I know my wifi is alright, it connects with internet to the Android phone. With previous nightly, I was not having the problem after I booted WEBOS and turned off the wifi in there--no idea why that seemed to work--tried it again this time and still no internet connection...any ideas are appreciated, thanks

[Nevertells]

mackjay, on 16 July 2012 - 08:22 PM, said:

Hello
I am  having the problem again of "connected but no internet". Using CM9 , nightly: 16 July. TP connects right away to the wifi, but the icon remains gray, never turns blue and no internet apps will work.  I know my wifi is alright, it connects with internet to the Android phone. With previous nightly, I was not having the problem after I booted WEBOS and turned off the wifi in there--no idea why that seemed to work--tried it again this time and still no internet connection...any ideas are appreciated, thanks

Try reflashing Gapps again.

[mackjay]

Nevertells, on 16 July 2012 - 09:30 PM, said:

Try reflashing Gapps again.

Thanks, I will try that

[mackjay]

Thanks Nevertells, this seems to have worked, it also solved some Google account probs I was having, like getting the Play Music app to work properly....

JM