14 replies to this topic

[zim2704]

I have been consistently losing internet connection after starting wired or wireless tether.  The 3g in the status bar blinks off then comes back on after about a minute.  I have tried multiple kernals, p3, chevy and gjdklg and different basebands, .01p and .03p with no positive results.

If I revert back to 5.0.7 the problems are non-existant.  Anybody have some ideas I can try to resolve this....love CM and really not wanting to go to another rom but really want 2.2

[Augon]

zim2704, on 27 July 2010 - 04:21 AM, said:

I have been consistently losing internet connection after starting wired or wireless tether.  The 3g in the status bar blinks off then comes back on after about a minute.  I have tried multiple kernals, p3, chevy and gjdklg and different basebands, .01p and .03p with no positive results.

If I revert back to 5.0.7 the problems are non-existant.  Anybody have some ideas I can try to resolve this....love CM and really not wanting to go to another rom but really want 2.2

I noticed a similar issue with the RC2, but I need to look more into wether it was just a settings issue for me or a full blown error.  So far I'm having much better luck with the latest nightly, but nightlies are not for the faint of heart.

[validoption]

+1 to this issue. Wireless tether will work for a few minutes then stop. 3G disappears then reappears.

[xCaldazar]

Same issue here wireless tether and wired, I was using pdanet and was able to keep a consistent connection. I'm using Chevy's 1.25Ghz ulv kernel with CM6 RC2.

[t-bucket]

I had a similar issue running Chevy's 1 GHz ulv kernel. Above 600 MHz 3G was toast. Changed to his lv kernel and problem solved. 3G has been rock steady.

[xCaldazar]

t-bucket, on 30 July 2010 - 08:59 AM, said:

I had a similar issue running Chevy's 1 GHz ulv kernel. Above 600 MHz 3G was toast. Changed to his lv kernel and problem solved. 3G has been rock steady.

So if we use setcpu to stay below 600Mhz you think that will work? Or best to move over to a lv kernel?

Strange that it would work fine with pdanet though, it still needs the 3G connection.

[nolsen311]

...For me this is not *just* when tethering.  I've been noticing really REALLY bad connectivity to 3G ever since the froyo builds started coming.

I can't verify whether this is restricted JUST to CM, or if it affects all Froyo on Droid, but I'm going to load the FRG01B leak and see.

Also doesn't seem to be connected to CPU Frequency, as I don't use anything above 600...and only use the standard or low-voltage.

EDIT: I suppose it's also fair to wonder whether Verizon's Network has been up-to-par.  Perhaps the high-end Androids are starting to inflict their wrath on a half-baked network.

Edited by nolsen311, 01 August 2010 - 09:02 PM.

[Regulus]

I have also experienced this issue.

3G keeps dropping me to edge every couple minutes or so. When 3G works, it reports good strength (~3 bars), but drops within a couple of seconds.

This started happening immediately after upgrading to RC2.

Edited by Regulus, 02 August 2010 - 03:54 PM.

[nolsen311]

How are you dropping to EDGE?  Did I accidentally post in the non-droid forum?

Update: I have not noticed the same flaky behavior on FRG01B yet.

Where's the bug tracker located?

[Regulus]

nolsen311, on 02 August 2010 - 04:15 PM, said:

How are you dropping to EDGE?  Did I accidentally post in the non-droid forum?

Update: I have not noticed the same flaky behavior on FRG01B yet.

Where's the bug tracker located?

I'm probably using the wrong term. It drops to 1x, whatever the term for that is. Analog?

Looks like more people are having the same issues: http://forum.cyanoge...dpost__p__33143

Edited by Regulus, 02 August 2010 - 04:27 PM.

[nolsen311]

Ah. Sorry, didn't mean to be a d*bag about it, I just didn't want to get cross posting with non-droid problems.

(It's 1xRTT, but that doesn't exactly roll off the tongue)

[tv31284]

zim2704, on 27 July 2010 - 04:21 AM, said:

I have been consistently losing internet connection after starting wired or wireless tether.  The 3g in the status bar blinks off then comes back on after about a minute.  I have tried multiple kernals, p3, chevy and gjdklg and different basebands, .01p and .03p with no positive results.

If I revert back to 5.0.7 the problems are non-existant.  Anybody have some ideas I can try to resolve this....love CM and really not wanting to go to another rom but really want 2.2

I've been getting this exact problem on cm6 (final and nightlies) too.  It occurs with jdlfg's, slayher's, and the stock kernel running at 800 (and 850 with jdlfg's).  Did anyone ever figure out how to fix this issue?

Edited by tv31284, 05 October 2010 - 06:18 AM.

[rayleigh]

i got same problem when i rebooted, then the 3g will dissapear
i have to go to parameter ##PROGRAM n then check the data connection enabled
and it happened everytime i turn the wifi on
i have to repeat the procedure again

[Skazer]

Bump... for me, there seems to be lost internet connectivity, meaning that it drops to 0 bps even when I'm downloading something on my laptop

[tv31284]

I had this problem too and I've noticed that if I don't use my phone everything's fine, so maybe there's some truth to keeping your speed under 600mhz.

In any case, I switched over to nightly build 138 and those issues seem to have resolved.  Wired and wireless tethering seem to stay on even when I'm using my phone, though I've only been messing around with it for past 15 minutes or so.  I'm using the stock kernel, also.