126 replies to this topic

[4FukSake]

crunchiemunchie, on 13 February 2011 - 06:49 AM, said:

got gingeryoshi rc4 up and running on my mytouch 1.2. its very fast and so far im impressed. the only problem is i cannot get it to connect to my pc. i plug it in and it charges fine, but neither the computer nor the phone recognize that they are connected at all. can anyone shed some light on this?

Trying using this Kernel. Its worked for me. Usb works and battery life seems reasonable.My link

[crunchiemunchie]

4FukSake, on 13 February 2011 - 07:11 AM, said:

Trying using this Kernel. Its worked for me. Usb works and battery life seems reasonable.My link

Thanks, this kernel seems to be better than the one i was using. Still no usb though. The problem is likely my usb cable. For some reason i think it might just be for changing and not data transfer

[raven198]

Alright guys, I am officially lost.  For some reason, the only thing I can get to run on my MT3G 1.2 is a Cyanogen build.  I have been trying for a few days now to get this Yoshi build to run with no luck.  I think I have tried something like 15 different kernels now and nothing, just hangs on the HTC Magic screen. This is how I'm sitting now.

Sapphire PVT 32A Ship S-ON G
HBOOT-1.33.0013d (SAPP31000)
CPLD-13
Radio-2.22.28.25
Oct 21 2009,22:33:27

I'm usually at work when I mess with my phone and have limited access to download sites and no SDK.  I'm up for any ideas at this point.

Thanks

[ezterry]

raven198, on 14 February 2011 - 03:48 PM, said:

Alright guys, I am officially lost.  For some reason, the only thing I can get to run on my MT3G 1.2 is a Cyanogen build.  

You must use ebi0 (or 32b as pershoot calls it for historical reasons) kernel..

Cm6.1 and many other older roms have that as the default, however some newer roms now have the 2708+ kernels that are only for actual 32b devices (despite the fact you are running the same kernel/spl on your MT1.2)

In short make sure you use the pershoot 32b version without the 2708 radio support (you do not actually need to change either your radio or spl).

You can also try my last cm nightly build but it may have a green screen (remember the ebi0 version) see ez-exp20110109-ebi0port_S.zip

Edited by ezterry, 14 February 2011 - 05:36 PM.

[raven198]

ezterry, on 14 February 2011 - 05:22 PM, said:

You must use ebi0 (or 32b as pershoot calls it for historical reasons) kernel..

You can also try my last cm nightly build but it may have a green screen (remember the ebi0 version) see ez-exp20110109-ebi0port_S.zip

I used your kernel and got the green screen.  I've been looking through the ones on droidbasement and I'm not quite sure which one to go with.  There are quite a bit of them.  Any suggestions?
Also, thanks for the quick response, I figured you or someone else with alot of knowledge on this would be able to help me.

Thanks

[crunchiemunchie]

raven198, on 14 February 2011 - 07:31 PM, said:

I used your kernel and got the green screen.  I've been looking through the ones on droidbasement and I'm not quite sure which one to go with.  There are quite a bit of them.  Any suggestions?
Also, thanks for the quick response, I figured you or someone else with alot of knowledge on this would be able to help me.

Thanks

raven, i have a mytouch 1.2 and am currently running yoshi's rom just fine. here is the link to the kernel i am using, hope it works for you: http://droidbasement...db-blog/?p=1563

[raven198]

Ok, so with ezterry's ebi0 it would load with the green screen, but soon after I started getting a whole sytem force close, so I switched to the pershoots kernel and as soon as it booted, which it did, I got the force closes.  So I Oshaka/Ezterry superwiped and installed the rom and pershoots kernel and just hung on the htc MAGIC boot screen.  Nan backup of CM nightly 257 for me.  if you guys can think of anything else, I'm up for it......heck if I can get your new unofficial CM7 rom running,terry, without a green screen I'll go for that.

[chris122380]

The download link for Ginger Toshiba dose not have the link for RC 5 :-(

[virajss]

chris122380, on 15 February 2011 - 05:16 AM, said:

The download link for Ginger Toshiba dose not have the link for RC 5 :-(

Ginger Toshiba????? Do you mean Ginger Yoshi? He has pulled down the RC5 link due to bugs. Wait for his next release.

[chris122380]

virajss, on 15 February 2011 - 03:30 PM, said:

Ginger Toshiba????? Do you mean Ginger Yoshi? He has pulled down the RC5 link due to bugs. Wait for his next release.

Yes I had mentioned Ginger Yoshi. Just after I saw the RC 5 the link had already been taken down. I'll be keeping my eyes open for any updates.

[inportb]

Well. I installed the 2825 radio and Ginger Yoshi RC4. It was pretty smooth o.0

[crunchiemunchie]

raven198, on 14 February 2011 - 03:48 PM, said:

Alright guys, I am officially lost.  For some reason, the only thing I can get to run on my MT3G 1.2 is a Cyanogen build.  I have been trying for a few days now to get this Yoshi build to run with no luck.  I think I have tried something like 15 different kernels now and nothing, just hangs on the HTC Magic screen. This is how I'm sitting now.

Sapphire PVT 32A Ship S-ON G
HBOOT-1.33.0013d (SAPP31000)
CPLD-13
Radio-2.22.28.25
Oct 21 2009,22:33:27

I'm usually at work when I mess with my phone and have limited access to download sites and no SDK.  I'm up for any ideas at this point.

Thanks

Ok I think your radio may be the problem. My radio is 2.22.23.02, try changing it and hopefully that will work. I could be wrong, but its the only difference I see from my phone. Maybe ezterry or someone with more knowledge could confirm or deny this. Also, do you have an ext4 partition? If i remember correctly i had to make one to get the rom to work. Just a thought

Edited by crunchiemunchie, 17 February 2011 - 04:14 PM.

[JoshH100]

So i'm a tmobile G1 with cyanogenmod 6.1 and have Danger SPL and Radio 2.22.23.02. So how do i use this SPL instead and upgrade my Radio saftly? because i don't think the version needed for cm7 is compatable with DangerSPL.

[Lebowski]

I am testing GingerYoshi1.0RC5.1 and gotta say you will be happy with the speed.. Not sure when he will release but shouldnt be long

[crunchiemunchie]

Lebowski, on 17 February 2011 - 04:10 AM, said:

I am testing GingerYoshi1.0RC5.1 and gotta say you will be happy with the speed.. Not sure when he will release but shouldnt be long

cant wait

Edited by crunchiemunchie, 17 February 2011 - 04:44 AM.

[Cokxx]

crunchiemunchie, on 17 February 2011 - 04:41 AM, said:

cant wait

LOL me 2^^

[crunchiemunchie]

for some reason i havent been able to replace zeam launcher with adw in the system folder. it keeps telling me there is no space left on device even though i know this isnt true. can anyone help me with this?

[GinoA]

crunchiemunchie, on 17 February 2011 - 08:18 PM, said:

for some reason i havent been able to replace zeam launcher with adw in the system folder. it keeps telling me there is no space left on device even though i know this isnt true. can anyone help me with this?

When you say that you know this isn't true, how are you deciding that?  The /system folder-tree is a different filesystem than the /data system-tree.  Most Android tools will report the free space on /data and /sd-ext.  This tells you nothing about the free space in /system.

Using the terminal emulator app, try running "df -h" and looking for the line that ends with /system.

[bone]

Got yoshi to work thanks to the link above I used ez-exp20110109-cm-ebi0port_S and then it was up and running (greenish) and then after everything was working, I went back into recovery and used boot-cm_2635.11_ds_32b-oc-uv-xtra-ram-fp-020711 and it's working perfectly.

So far I'm extremely impressed with this ROM

[darkhorse1985]

bone, on 17 February 2011 - 09:07 PM, said:

Got yoshi to work thanks to the link above I used ez-exp20110109-cm-ebi0port_S and then it was up and running (greenish) and then after everything was working, I went back into recovery and used boot-cm_2635.11_ds_32b-oc-uv-xtra-ram-fp-020711 and it's working perfectly.

So far I'm extremely impressed with this ROM

could you send me a guide to help me install on the mytouch 3g